Spindles
- Thread starter jokerman
- Start date
Google does 
Well should've been a little more descriptive in question,wanted to know if the 2010 dragon spindles are the machined light weight versions,because I bought a set and these are solid with 2 cut outs like an "06" model that came on wifes 755,THANKS for your help
M
monster715
Well-known member
Yes, the 2010 'Dragon' spindles will have the lightweight cutouts in them. But make sure they are the Dragon spindles. Other IQ sleds from that year (Shift, Touring, etc) will not have the cutouts in them.
M
Mech Engr
Well-known member
M
Mech Engr
Well-known member
spindles
Oh crap! Here are a couple more I had lurking around...
This is the only one I have currently...
John
Oh crap! Here are a couple more I had lurking around...
John,
In your final install... did you put the spacers (#7) on the Pivot bushing (#14 in second dwg)
.
In your final install... did you put the spacers (#7) on the Pivot bushing (#14 in second dwg)
.
M
Mech Engr
Well-known member
spindles
No D, as you can plainly see they are on my sled!!
But thanks for asking. I do have a very nice set of the stock 05 spindles I'd sell for real cheap! 
John
No D, as you can plainly see they are on my sled!!
But thanks for asking. I do have a very nice set of the stock 05 spindles I'd sell for real cheap! John
M
Mech Engr
Well-known member
John,
In your final install... did you put the spacers (#7) on the Pivot bushing (#14 in second dwg)
.
Actually Eric, these spindles were very very slightly wider than the stock and I couldn't fit the two stock spacers. So I made a single spacer for each side.
John
Similar threads
