Speedwerx single pipe

[BarkBustnOutlaw]

I have been installing all the fun stuff that I have been getting from speedwerx and RKT and many more. My problem is the donut on the can side of the pipe does not fit the speedwerx pipe. The donut is to small to fit over the pipe its close but I just cant get it on the pipe. Anyone have this problem??

 

[JasonAK]

If it is the speedwerx 925 M8 pipe, it uses the M1000 donut from the pipe to the can. Same OD but Lager ID.

Jason

 

[BarkBustnOutlaw]

If it is the speedwerx 925 M8 pipe, it uses the M1000 donut from the pipe to the can. Same OD but Lager ID.

Jason

Sorry Its on my M1000

 

[Ski-Laxn]

Speedwerx has a donut for it. It takes a 2" ID. Ran into the same problem today will order one in the am. 5211592

 

[BarkBustnOutlaw]

Speedwerx has a donut for it. It takes a 2" ID. Ran into the same problem today will order one in the am. 5211592

Thanks that figures they are the only one that sends a pipe out without all the parts needed like a pipe dampener and now the donut.

 

[Ski-Laxn]

Bikeman did the same thing to me a few weeks ago.

 

[Pieguy]

Yeah, they should ask you if it's going on a stock "Y"pipe or one of theirs.

 

[BarkBustnOutlaw]

Yeah, they should ask you if it's going on a stock "Y"pipe or one of theirs.

This is for the can to pipe donut.

 

[Dale Hastings]

I ordered speedwex Y and pipe and super Q can. Thaught I had the same problem until I dug around in the box again. The other donut was in there. I,m on A 09 m1000, I went with RKT heads and porting and BDX air intake also. My buddy rides an 09 m1000 with SLP pipe kit and timber sled intake. Field tested on friday(6" of snow). Apparently RKT heads and porting works cause the two are VERY noticably different. I believe I now own A 200+ HP sled.Sorry maybe to much input.

 

[BarkBustnOutlaw]

I ordered speedwex Y and pipe and super Q can. Thaught I had the same problem until I dug around in the box again. The other donut was in there. I,m on A 09 m1000, I went with RKT heads and porting and BDX air intake also. My buddy rides an 09 m1000 with SLP pipe kit and timber sled intake. Field tested on friday(6" of snow). Apparently RKT heads and porting works cause the two are VERY noticably different. I believe I now own A 200+ HP sled.Sorry maybe to much input.

Just what I want to here! Donut on the way cant wait.

 

[89sandman]

for the money they charge for a pipe you think they would include the donut, or at least tell you you'll need one!!!