SLP Push Arm Photo

[otterby]

Does someone have a picture of an SLP Push Arm mounted on a '06 900 RMK. I'm putting the sled back together and adding the push arm but not too sure exactly how it mounts. Thanks

 

[POLZIN]

here ya go! the picture is sideways for some reason so turn your head to the left or you puter to the right !

 

[guidoxpress]

mak sure there is a GAP, like paperthin at least, between the push arm and the recoil housing or you will get MGEA vibration on your chassis and wear out the push arm.

This ALSO applies to the factory torque stop on the clutch side on the engine brace...