Skinz Float Plate / Extreme Bumper??

[SnowJunkee]

I was working on installing my new float plate on my Pro this weekend and found out in mid tear down that the two lower attachments are not factored in to the plate! Anyone have any interesting install ideas to make this work??

 

[BILTIT]

You must mean the ultimate bumper? The extreme doesn't have lower mounts.

 

[SnowJunkee]

Correction, yes it's the Ultimate bumper

 

[BILTIT]

Maybe give skinz a shout? They might have an idea how to fit it best.

 

[SnowWay]

Just mark them from the inside, the drill the skid plate and bolt everything up....the ultimate bumper and Skinz float plate work great together.

 

[SnowJunkee]

Just mark them from the inside, the drill the skid plate and bolt everything up....the ultimate bumper and Skinz float plate work great together.

Did you have any issues with the bumper holes lining up after stretching over the skid plate? This looked like it could be an issue after popping a couple more holes thru in same place on the sled...

 

[SnowWay]

Not at all...they fit together perfectly. I used a floor jack to push the skid plate tight. After the float plate was mounted I loosely bolted the upper bumper mounts and then had my wife push down on the bumper a little until the bottom mount lined up (didn't take much at all)