Skidoo Zx chassis weight transfer

[sledstew]

looking to see what has to be done to get the weight to transfer on my 02' ZX chassis in powder . I put in a watercraft triple and the lift on the skis is not there, I have the limiters loose and the weight just does not transfer, please let me know if you've found a solution. THANKS-STEW

 

[IWantATurbo]

got any pics of this ride???

i was told to lower the front arm that should help?

 

[8alltheway]

im very curious about this too,
i know the zx experts are out there...

 

[summitchaser]

I have my rear suspension as stiff as it will go, would a softer rear suspension help with the weight transfer?

 

[diggerdown]

Lighten up the rear susp. spring. If that still is'nt enough drop the front mount down an inch. You may have to re-shock the rear. Throw that cheap hydraulic shock away and get one that is valved to be light on the top and gets progressively stiffer with moderate rebound.

 

[STORMY]

take the transfer blocks off also