Skidoo triple pipes (4 sets)

[maluchm]

DynoPort 800 trail pipes CK3 - $300

CrankShop 600 F chassis - $250

CrankShop 700 F chassis - $250

Jaws 800/925 F chassis - $250

PM or post email for pictures

 

[DWHalverson]

Cleaning house or what? I still have my CKIII. I should snag the DP pipes, but you already know my plans for that engine. Hummm

Dave

 

[maluchm]

Cleaning house or what? I still have my CKIII. I should snag the DP pipes, but you already know my plans for that engine. Hummm

Dave

Hey Dave, I might have an extra 809 laying around to go with the pipes for an additional fee

 

[DWHalverson]

E-mail me some pictures of the DP pipes. I assume they are low elevation? What is the stinger id? These were they same dimensions as the CS pipes weren't they?

Dave

dwhalverson@rap.midco.net

 

[maluchm]

The pipes came off this sled that I picked up when I first go out here. Supposedly originally owned by a very reputable RMSHA crew. The motor needed some work so I pulled it for a 950 with a 40 shot. I'll double check the stinger I.D. and email you with pictures

 

[DWHalverson]

So you are still running that sled with a 950 in it now? I still got my pictures of that sled from Fairview.

Dave

The pipes came off this sled that I picked up when I first go out here. Supposedly originally owned by a very reputable RMSHA crew. The motor needed some work so I pulled it for a 950 with a 40 shot. I'll double check the stinger I.D. and email you with pictures

 

[maluchm]

So you are still running that sled with a 950 in it now? I still got my pictures of that sled from Fairview.

Dave

The sled sits as a rolling chassis currently. I put in way more time at work in the last six months then I thought I would. Do you know who had the sled at Faiview?

 

[DWHalverson]

Didn't catch a name. He was riding with a guy that had a Viper or Mnt Max with a bad chaincase bearing. I want to say they were from somewhere east of SLC or maybe Evanston Wy.

Dave

The sled sits as a rolling chassis currently. I put in way more time at work in the last six months then I thought I would. Do you know who had the sled at Faiview?

 

[wellfed777]

i've got a pretty much stock 97 700 mach z what kind of hp would a aftermarket setof pipes add?
thanks

 

[maluchm]

i've got a pretty much stock 97 700 mach z what kind of hp would a aftermarket setof pipes add?
thanks

The Crank Shop pipes are Improved stock pipes and spin 9200-9400. Maybe a conservative guestimate of 10+ HP.

 

[wellfed777]

thanks! thats 1000 more rpm than i'm turning now maybe it would do more than 10hp?? also would they be lighter than stock tripple pipes?

 

[DWHalverson]

They will be a lot lighter than stock triple pipes.

thanks! thats 1000 more rpm than i'm turning now maybe it would do more than 10hp?? also would they be lighter than stock tripple pipes?

 

[maluchm]

Dyno Port pipes - SOLD
Jaws and Crank Shop 700 pipes sold pending payment.

Yes I do have the flanges for each set, just didn't put them in the pictures.