ski stance

[zx700]

has anyone narrowed their ski stance? I am looking into puting 01 summit radius rods on my 02 summit because the 01 was three inches narrower. thinking this should make may sled more nimble. better side hilling and such. but worried it might be a hand full on the trail. not sure either why doo only did this for one year. any info or opinions would be appreciated!

 

[BU1]

You also need shorter steering rods, shorter shocks and a shorter sway bar if you want to use it.

 

[zx700]

sway bar is removed. i have the steering rods. did not realize the shocks were different. thanks!

 

[jheitzman]

radius rods

I make my own radius rods with aluminum hex bar and ball joints at each end. getting rid of the stock rods will really free up the front end!

Josh

 

[play2much]

stance

I did this on mine i put 01 bars on my 02, i didnt have to change shocks it narrowed my stance and also raised my front end, ( makes my sled look proud with its chest out haha) i dont have the sway bar, i also loweded my track susp. to the bottom hole on that black bracket on the back. i can lay my sled over almost effortly i dont notice to much on the trail but im not on the trail a whole lot (the best trail on the mountain is the one i make.)