siezed one side, now what 2005 rmk900

[b2krawler]

after chasing a few compression problems, i decided to pull the cylinders, the left side had siezed at one point, the rings and piston had become one, and i have a little scarring on the cylinder wall.

what is my next/ most affordable step

are these cylinders borable, or are they nikisil, or something

do i do both sides, guess i have to if i am boring?

go with polaris or aftermarket pistons/rings?

thanks

 

[yz400ex]

Cylinders are Nikasil. Pistons you will want to go with OEM Polaris. If you just get the cylinder renik'd you only need to do the side with damage.

 

[b2krawler]

Cylinders are Nikasil. Pistons you will want to go with OEM Polaris. If you just get the cylinder renik'd you only need to do the side with damage.

thanks

who does this? local dealer?

 

[yz400ex]

Your dealer probably does not do them, but probably has the resource they can send out to, to have it done. There are lots of places that re-plate cylinders.

 

[BIGGDAWG]

i use us chrome for my cylinders they do a great job and most of the time will have one already done you just send yours in and they send you one they already had finished. http://www.usnicom.com/

 

[sloan188]

Adrian Bernard in Quebec if you're in Canada. Usually has them available so you get it quick then send them your old one.

http://www.cvtech-aab.com/contenu/index_ang.cfm

 

[backcntryrider2000]

I have one cyl.

I have one cylinder off of an 05 900 that I would sell. My number is 641-529-1731.