Did about 100 miles today, and the sled ran good aside from a few small backfires ( very small, just a small pop) after driving very slow <15 and having to feather the throttle for prolonged periods of time (15> min). During the ride my sled rolled over 100 hours of use, and after it did, when I would start it the LCD would read SErUCE for a few seconds, the. Go back to its normal reading. It was a really warm day about 38-45 degrees. Is this something I should be worried about? I haven't changed the plugs since I got the sled and I have no clue how old they are. I run 91oct, but had to add some 87 as it all they had at the trail store. What do you guys think the issue could be?
SErUCE
- Thread starter MicahBS
- Start date
It's optional. U can change the intervals on it or shut it off completely. It's just a reminder.
Scroll thru the gauge and when it pops up. Hold the more button and it will flash then toggle up and down to change it shut off
Sent from my iPhone using Tapatalk
Scroll thru the gauge and when it pops up. Hold the more button and it will flash then toggle up and down to change it shut off
Sent from my iPhone using Tapatalk
So was it just telling me that I went over 100 hours, and that it shuld have a routine check?
Yup
You can shut them off or set it to a higher interval.
http://www.snowest.com/forum/showthread.php?t=133418
You can shut them off or set it to a higher interval.
http://www.snowest.com/forum/showthread.php?t=133418
