Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

  • Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

Scratchers on M10

I ran sratchers on my M-10. I had to drill a hole for the bolt to go through at the front and then they sat on top of the rails when they where lifted up. You can sort of see them in this pic.

Tyler28.jpg
 
Get ahold of Alpine Motorsports in BC.They have the best I have seen.They bolt onto the bottom of the foot rails and woork awsome.:beer;
 
What Turbo Monster said,you can run your rail scratchers,but I found as you will that if you run a deep track of coarse that even on a short trail they are too far back and not providing enough lube,I replaced my guides and track clets because of rail scratchers,then with the under tunnel scratchers big lube,don't forget you got big time track speed,call them guys in B.C,oh hey don't forget to lift them rail ones when your sled goes beep beep beep
 
Thanks for the replies

I had the tunnel mounted ones on my Nytro (stock suspension) and they worked good but I don't really want to mount them there on this sled cause it has a CR tunnel.

And I don't know how the rail ones would mount because on the left rail, the Ohlins res is mounted on the side of the rail???????????

Anybody got pics of mounting locations with that res on the rail?
 
Thanks for the replies

I had the tunnel mounted ones on my Nytro (stock suspension) and they worked good but I don't really want to mount them there on this sled cause it has a CR tunnel.

And I don't know how the rail ones would mount because on the left rail, the Ohlins res is mounted on the side of the rail???????????

Anybody got pics of mounting locations with that res on the rail?

I am running into the same problem as you, I do not want to drill into my CR tunnel, nor my CR m10. I was hoping for some ski scratchers.
 
Jet - I don't think the ski scratchers work very good. Not sure cause I've never used them but thats what I've heard.
 
Thanks for the replies

I had the tunnel mounted ones on my Nytro (stock suspension) and they worked good but I don't really want to mount them there on this sled cause it has a CR tunnel.

And I don't know how the rail ones would mount because on the left rail, the Ohlins res is mounted on the side of the rail???????????

Anybody got pics of mounting locations with that res on the rail?

We mount the reservoirs on the INSIDE of the rail, protects them better and gets 'em out of the way of the scratchers.
curt
 
Premium Features



Back
Top