Risers to how tall you are

[JustinB]

OK still mess'n with this I am 5'10 Would a 4"rise be to small I was thinking 5" RSI bars but will my stock mnt bar mount to them? How tall are you guys and how tall are you risers. My bro is 6'5 and we need some thing both of us can ride. We are running 02 and 03 summits.

 

[Ryan-41]

Im six foot and a three inch riser fits me perfect on my M7

A four inch should be fine!!

 

[Camo sled!]

my sled is old school so it a little different, but i have a 6 inch riser. i like it, but i could honestly go more... but again old school sled... im 6'2"

 

[hilinerider]

six three with 8

 

[likkerpig]

6'6" with 3.5" riser on 06 M7, would be more comfortable with maybe a 6" riser but oh well.

 

[summ8rmk]

i'm 5-11 with long arms and on my 03 summit-x it came with a factory 3in. i put on a 6in. on my m8 it has 3 3/4in. riser but ifeel like another 1 or 2 in. would be good.

 

[rmk2112]

You should be able to stand on your boards at the footwells.... with your arms at your sides.....then raise up your hands a few degrees til they are about the level of your jewels. Thats where your grips should be.

That way you're not leaning over to grab the bars and you have plenty of leg travel to flex your knees on the bumps and your forearms will never have to go above 90 degrees to your body.

 

[HighonBoost]

stand on your sled, put your hands where you want and get someone to grab a tape and measure...

 

[brahm]

I'm 5'11, I've got a 6" riser on my Mountain cat which is nice, and the stock riser on my Summit Adr (07) which i feel I can use a couple more inches on that.

 

[Ausm7499]

6'2" and running an 8" RSI on my M-series. I wouldn't want to go any higher.

 

[Rowboat]

6'2" 6" on my rmk... perfect.

 

[cat700]

im 6'3" and a 2" on my 06 m7 is just fine.

 

[yardfarmer]

5' 10" with a 4" on a 02 polaris

 

[Dogmeat]

6'4", and I wish I had 8" risers on all my sleds ...

I've got a 3" on my 900 RMK which isn't near enough, and the telescoping bars on my M8 aren't high enough either ... I would like 4-6" more over the M8 bars as well.

 

[overtheedge]

I'm 5' 7" and have a 6" on 04 RMK and love it.

 

[Bburrap]

I'm 5'10" On my XP I have a 4" riser but I also use a 3" drop bar to get the 7" rise I like. New set-up for this season, think it's the right combo!

 

[cmill9]

5'11" and I got a 5 1/4" riser on my 08 D7 and think she's about right!

 

[KSH]

5' 8"............... 3" riser an a M

It's fine most of the time. But I'm installing the adjustable post with the riser on it.
So when I need more I got it.

 

[rmk2112]

5' 11" and a 6" riser on 06 RMK 700 (with selector in # 3 spot)

 

[ne1cadrgn]

Im 6'-2" and run a 5.25 on my 08d7.