Rideing at sea level

[Joe19]

I have a 07 skidoo 800 should i change any thing (like jets) or am i ok i usally ride from 4000 to 7000

 

[High Voltage]

Jetting will take care of itself by its DPM you should only need to change amount of weight in rollers of the primary clutch if you can't acheive your desired rpm with just changing the clickers.

 

[Joe19]

thanks

 

[theultrarider]

Actually if you are set up for 4-7000 and go down to sea level you will be over reving. not familar with your sled. Some are more forgiving than others. Just don't over rev it too bad and check your plugs to make sure the computer does do its thing as you will be running lean if the computer does not richen it up for you. Have fun!

 

[High Voltage]

If you are over reving add weight to the primary.