Retro Ideas

[IDAHO HOT SHOT]

Has anyone heard if the 2013 belt drive system will bolt on to the 11-12 Pros. It was talked about a while back, but I have not been on the site for a while.

 

[sledneck_03]

Has anyone heard if the 2013 belt drive system will bolt on to the 11-12 Pros. It was talked about a while back, but I have not been on the site for a while.

too early to say, but if the shaft ends are the same then yes. Anything is possible with some custom machining......

 

[Leaf27]

Not to highjack the thread but what about the running boards, will you be able to purchase the 13's boards and put them on a 12 or 11?

 

[jdtech65]

The running boards will be able to be retrofited onto the 11s and 12s. The belt drive would be able to be changed over also on the 11s and 12s but they haven't released a kit for it. I don't expect them to come out with the belt drive kit until snowcheck is over. That way more new sleds will be sold to get the belt drive. Then after that I expect them to release a kit but my guess is the kit won't be available til November after all production sleds are done.

 

[sledneck_03]

Not to highjack the thread but what about the running boards, will you be able to purchase the 13's boards and put them on a 12 or 11?

you wont have to purchase parts, sounds like they are offering a kit, and for sure they are offering the black stronger burandt ones as a pure polaris kit.

First thing i would do is take the stock boards and rails to the powder coat.

 

[Leaf27]

you wont have to purchase parts, sounds like they are offering a kit, and for sure they are offering the black stronger burandt ones as a pure polaris kit.

First thing i would do is take the stock boards and rails to the powder coat.

Tried finding the Burandt parts on Polaris's web site but no luck. Anyone have a link?

 

[Leaf27]

Found it.

http://www.facebook.com/media/set/?set=a.370689226276642.93447.129298157082418&type=1

Thank Gmustangt