Quick drive tools

[goforbroke]

Haven't seen a recent thread and need to buy a set. I see some offer tools for 14 and up. I have a 13' and a 14' and would like the tools to work for both, what tools should I buy? I have done it buy hand and once it went quick and the other time took 50 minutes to get it to align, so want to buy some tools.

Thanks

 

[nosman4]

Call Dave at Happy Face, He will hook you up. 541-419-0500 or 866-623-8473. You can get the 13 tools which have a shorter stud or the 14 tools which have a longer stud. You can use the 14 tools on both they just don't thread all the way in.

 

[CO Powder]

If you take a little grinder and chamfer out the back sides where the shafts go through, you will find you probably do not need the tools. They are much easier to get started. I also carry duct tape to squeeze the belt in the middle a little. Then it is one piece (belt/sprockets) and easier to handle.

On my new '14 I don't expect to have a failure. They seem to be almost non-existent for the '14s and up. Most accounts even skipped the full break in period. Ride it all season and fit a fresh on for next season, which is probably what you are doing...