Quick Clickers TRA Clutch

[snowmed221]

Has anyone used the "Quick Clickers" for the Ski Doo TRA Clutch? Any suggestions, cautions, or warnings on this?

Thanks!

 

[xpspenziv]

Has anyone used the "Quick Clickers" for the Ski Doo TRA Clutch? Any suggestions, cautions, or warnings on this?

Thanks!

yup work great.
When installing, (DO NOT PULL BOLT OUT) as there is a washer that will fall, now yur pulling the clutch. test to make sure you have enough turns to adjust and not to many turns keeping the clicker from moving far enough to change clicker. Count flats from when it starts to tits. use red loc tight.

Keeep yur stock nuts in yur back pack or tool kit. Just in case.
super simple and quick adj.

 

[snowmed221]

yup work great.
When installing, (DO NOT PULL BOLT OUT) as there is a washer that will fall, now yur pulling the clutch. test to make sure you have enough turns to adjust and not to many turns keeping the clicker from moving far enough to change clicker. Count flats from when it starts to tits. use red loc tight.

Keeep yur stock nuts in yur back pack or tool kit. Just in case.
super simple and quick adj.

That's good to hear... Thanks for the advise!