Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

  • Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

questions for m8 owners

M

mtn mike on boost

Well-known member
1) i just put an slp pipe kit on and it hits my diamond s hood brace. what have you done to remedy this?
2)does the 09's have an accessory power supply behind the steering post like my old 06 m7 did? if not, where are you powering your aftermarket lights from?
i like the idea of pulling power from the high beam circuit, so i can turn them off during the day.thanks
 
cut down the rubber block under the pipe to lower it down some,i also put some weather stripping around where the hood sits, and yes there is a power supply, right below the ign switch there is a rubber 2 pin plug with 1 black wire plugged into it, unplug the one with the black and you can use the other one for power, i hooked mine into the highbeam circuit like you said, either way works
 
Last edited:
lights and hood

1) i just put an slp pipe kit on and it hits my diamond s hood brace. what have you done to remedy this?
2)does the 09's have an accessory power supply behind the steering post like my old 06 m7 did? if not, where are you powering your aftermarket lights from?
i like the idea of pulling power from the high beam circuit, so i can turn them off during the day.thanks


i just took a BFHammer to the brace, worked fine.. the hood still looks fine :D
the new hoods are bigger so you don't have to hit

i run a helmet light, ya good idea to pulling power from high beams that's what i did, hell ya :beer;
 
Premium Features



Back
Top