Push Arm/Torque Arm

[E-Zmoke 4:20]

Lost the instructions for the push arm install, where does one mount? Any pics of one istalled?

Thanks

 

[Kraven]

PUSH ARM (RECOIL SIDE) EDGE

Lost the instructions for the push arm install, where does one mount? Any pics of one istalled?

Thanks

If it's the PUSH ARM it goes on the recoil side

Snubber butts up against the recoil housing and the folded/bent over edge on the bracket "hooks" onto the aluminum bulkhead. Snug up the snubber and drill (1) 1/4" diameter hole into the aluminum bulkhead.

There's a pic of a very similar one on my DRAGON 700 posted in the IQ Section, pinned at the top, under INCREASING YOUR IQ, Then TECH TIPS for 600/700/800 CFI's

 

[Jonce]

From SLP's website http://www.startinglineproducts.com...iew=photos&catalogID=3&catID=18&productID=166

 

[Kraven]

From SLP's website http://www.startinglineproducts.com...iew=photos&catalogID=3&catID=18&productID=166

That's an IQ install pictured there, not an EDGE

 

[Jonce]

Crap. Sorry about that, I will have to look through my old pics and see if I can find my '04 RMK pics with the push arm.

 

[Kraven]

Crap. Sorry about that, I will have to look through my old pics and see if I can find my '04 RMK pics with the push arm.

I had one on my old 2002 EDGE-X, sold the sled and no pics.

The other EDGE's in our group don't have 'em