Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

  • Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

Pto seal breather???

hey
My sled has been leaking alot of grease and i found out that the pto seal breather is not there. I was wondering where i could get the nipple to put back on so it stops leaking grease? It is the metal nipple that is directly below the bolt that makes sure that the engine doesn't move when under load.

Sorry i am bad at explaining stuff let me know if you need clarification
 
hey
My sled has been leaking alot of grease and i found out that the pto seal breather is not there. I was wondering where i could get the nipple to put back on so it stops leaking grease? It is the metal nipple that is directly below the bolt that makes sure that the engine doesn't move when under load.

Sorry i am bad at explaining stuff let me know if you need clarification

if your sled i leaking greese out of the pto seal you need to tear the motor apart and find the problem. the crank bearings are sealed and if they lost greese it wont be long before kaboom clunk clunk.lol if your pto seal breaths than that is all so another problem it will more than likely burn your motor down from a lean mix. have you checked your y-pipe bolts those make a mess when they come loose and is commen to happen on ski doos p.s i just noticed you dont say what sled i gess that would make a big dif. in what i said about sealed bearings pss. is the mess on front (carb side) or back of motor
 
Last edited:
if your sled i leaking greese out of the pto seal you need to tear the motor apart and find the problem. the crank bearings are sealed and if they lost greese it wont be long before kaboom clunk clunk.lol if your pto seal breaths than that is all so another problem it will more than likely burn your motor down from a lean mix. have you checked your y-pipe bolts those make a mess when they come loose and is commen to happen on ski doos p.s i just noticed you dont say what sled i gess that would make a big dif. in what i said about sealed bearings pss. is the mess on front (carb side) or back of motor

What he said, this is posted over on Doo talk where you asked.:beer;:beer;
 
Premium Features



Back
Top