Going for a late fall small build on my 13 Proclimb LTD 153"
Sled is a stock machine with no engine mods at all. Not even a can. Yet
I have done a few small things to the sled and there is a few more things going on it. I have planed to keep my sled until it is payed down, so there is going to be more to come on it over the seasons.
Sled has 1500 km on the engine and still on its first belt. No belt burner here
The things I have done to it by now is:
- zbroz T top, and removed the telescopic post that don`t lock into position.
- Skinz handlebars because I bent the stock bars.
- CREE 36W led on the handlebars.
- Removed e-start because my battery would not charge or hold the juice.
- DIY snow flap because my stock one ripped after to much wheelie.
- Removed ALL stock decals and put my own on it.
Now there is going a BDX hood on it with the headlight delete and SLP air temp relocator kit.
Arctic Cat ZR8000RR handlebars are going on with a FLY handlebar pad. 6 inch riser and no mountain strap this time.
Have 2 Rigid D2 that is going on. One on hood in front of the windshield and one with following handlebar mounts on my handlebars.
My next mod after this will be BDX boards, BDX front suspension and a can. I don`t want a loud one because I often ride close to town or cabin area.
This is going to be a mild build since I don`t go over the top on engine mods, suspension mods or shock mods.
Sled is a stock machine with no engine mods at all. Not even a can. Yet
I have done a few small things to the sled and there is a few more things going on it. I have planed to keep my sled until it is payed down, so there is going to be more to come on it over the seasons.
Sled has 1500 km on the engine and still on its first belt. No belt burner here
The things I have done to it by now is:
- zbroz T top, and removed the telescopic post that don`t lock into position.
- Skinz handlebars because I bent the stock bars.
- CREE 36W led on the handlebars.
- Removed e-start because my battery would not charge or hold the juice.
- DIY snow flap because my stock one ripped after to much wheelie.
- Removed ALL stock decals and put my own on it.
Now there is going a BDX hood on it with the headlight delete and SLP air temp relocator kit.
Arctic Cat ZR8000RR handlebars are going on with a FLY handlebar pad. 6 inch riser and no mountain strap this time.
Have 2 Rigid D2 that is going on. One on hood in front of the windshield and one with following handlebar mounts on my handlebars.
My next mod after this will be BDX boards, BDX front suspension and a can. I don`t want a loud one because I often ride close to town or cabin area.
This is going to be a mild build since I don`t go over the top on engine mods, suspension mods or shock mods.
