Pro RMK clutching

[Joey 14]

What does everyone run for weights and springs on a 13 800 pro RMK? Seems 8200/8300 rpm is a waste of rpm and out of the power band. What are your thoughts?

 

[knocksum]

8200 is a good number. Try to watch rpms on a good climb. Dont tune on the trail. I run 60s for 8000ft. 62s for 6000ft. 64s for 2500ft.

 

[AdrenalineAddict]

My 2012 Pro required 8,000 RPM with Polaris recommended clutching 10-60's with black/purple secondary. My 2014 seems to like 8150-8200 running 10-60's ground to 10-59's with black/purple secondary, runs much stronger than my '12. It's really hard to improve on the stock clutching, Polaris did an excellent job.

 

[sledneck_03]

Book says 8250 max. Trust me i would rather run 8300 than 8100 and bog to 7900! Its horrible

 

[CaptNCoke]

Buy the rooster built clutch kit..... These guys know their chit
Hands down best bang for a buck.... Imo

 

[polaris910]

New P-1s

MDS all the way ! Steve's new P-1s set up with 120/340 primary spring STK secondary give'm call 509-899-0605 they flat work !

 

[damx]

The new mds. Are much better. hard to beet Imo. And stev is top notch. Even after he has you're money.

 

[Joey 14]

Thanks for all the info.

 

[JonezyBones]

Team silver 180/344 primary spring. MDS set at 65 grams weight in the heel.
Pulls 8300-8250 at 10,000-11,000 feet. Still working on secondary to get the desired backshift in the fluff. Also geared to 2.28ish. Love this set-up

 

[Reg2view]

Anything at or below 8100 with the stock pipe is leaving max HP lying in the motor. That motor really likes at least 8200 stock.

 

[john heston]

Pro clutching

Carls cycles in boise Idaho 208-853-5550 has a great set up for pros. Just tell them what elevation and they will set you up

 

[Geezer]

Rooster built

Had those guys do my clutch and the first and only ride this year was awesome. great clutch set up. Terry