pro rmk 600 rpm's…..

[lynxenduro]

pro rmk 600 rpm's…..

I've been riding my pro rmk 600 this weekend. 5,7 hours, 100 km. It pulls 7950 rpm at 400 meters altitud. It's 10-64 weights. Do I need more hours on it before it pulls about 8250? Whats your experience with the new 600 with a 155" track?

 

[AndrettiDog]

1200 feet? Sounds like you might need less weight on your primary.

 

[lynxenduro]

yes it's about 1200 feet. Does anyone have a spring, weight clutch chart from Polaris for the Pro 600 ?

 

[ak]

When u find one let me no I've been asking also I don't no what weights are in my 600 pro but I'm riding that same elevation and I'm hitting 8200 constantly.

 

[lynxenduro]

When u find one let me no I've been asking also I don't no what weights are in my 600 pro but I'm riding that same elevation and I'm hitting 8200 constantly.

8200, great! Can you check what weights you have? I know my dealer changed them to 10-64...

 

[benny7cfan]

I have the chart. Not sure how to scan it in so please see below:

0-1500'-->10-64
1500-3000'-->10-62
3000-5000'-->10-60
5000-7000'-->10-58(stock from the factory)
7000-9000'-->10-56
9000-10000'-->10-54

Helix-->(56/42/.36) all elevations
Drive Clutch Spring-->(Black/Green) all elevations
Driven Clutch Spring-->LH Blk/Pur all elevations

 

[IQ?]

Hello
We run 10-62s here 2500feet
will not pull 64s
Ed

 

[Super A]

My dealer told me to wait til it had 200 - 250 miles, I was having the same concerns.. something about break in with synthetic oil and the ecu advances after so much time. You may check with your dealer for similiar advice

A

 

[lynxenduro]

5,72 MPG for the first 64 miles on the pro 600 and 7950 rpm's after 5,8 hr.
Last year my 2011 RMK 800 was 7,2 MPG and 8250 after 3 hr.

So my 600 takes more gas and has less rpm's. It feels a bit strange… Same riding conditions as last year, trail and in the trees (no deep powder yet) I'll guess I have to put some more miles on the 600...

 

[IQ?]

5,72 MPG for the first 64 miles on the pro 600 and 7950 rpm's after 5,8 hr.
Last year my 2011 RMK 800 was 7,2 MPG and 8250 after 3 hr.

So my 600 takes more gas and has less rpm's. It feels a bit strange… Same riding conditions as last year, trail and in the trees (no deep powder yet) I'll guess I have to put some more miles on the 600...

It will use a lot of fuel if it can't pull Rpm.

I will have a kit out soon-Just some more testing
Will include our gears and springs and weights.
ED

 

[lynxenduro]

Yes!! things starts to look OK
Pulls 8150 (I saw 8200) with 10-64's after 7,3 hr / 89 miles, 8.71 MPG! Ordered an SLP can yesterday. That will be interesting.

 

[lynxenduro]

flatland riding new year's eve. No deep powder yet where I live....

http://www.youtube.com/watch?v=wIdZFWzyp0Q