Powder Pro's Question

[19 Hundo]

Picked up a set of Powder pro's on the cheap. The guy I bought them from was no help when I asked which way the Carl's cut go and which position to mount them in.
So for those of with the Carl's cut out, I am assuming the cut out goes to the outside???

And which position do people fine the best for the pro, the forward or the aft position and what are the differences in the handling characteristics of the sled??

Thanks

 

[mtncat1]

you are right the cut goes to the out side. as far as the forward or aft position on the bolts I always ran them on my cat to the aft position. they really turn good so I don't think you will have to run them in the forward position . I really like them and wish I still had them .

 

[ecut]

pics

any pics of cuts?

 

[sled_guy]

From SLP's website...

NOTE: SLP Saddle Brackets have a series of two holes that the runners
can be mounted in for fine tuning them to your sled setup and riding style. The forward holes position the ski
forward in relationship to the spindle and provide slightly lighter steering. The rear holes position the ski back
and in this position the skis will tend to return to center (straight ahead) more on their own, yet will require a little
more effort to steer. Both skis need to be mounted in the same mounting position.

sled_guy

 

[19 Hundo]

Yes, I did read that off their website...Was looking for some feedback from people that have mounted them in both locations?