Plug and play Fuel Harnesses for Turbos

[spoon]

Tired of replacing wet relays and cutting your stock harness up to wire in your high volume fuel pump? We have developed a plug and play harness to go with your High volume intank pump or we can supply a pump and harness together. Also have connector kits to repair already hacked harnesses so unit works as it should. Relay is a fully sealed automotive grade relay with sealed connector. 07-08 Cats harness only 69.99, 05-06, 09-10 harness is 99.95. High volume pumps are 250$. Best intank pump on market. Connector repair kits are 4.99 each. Sold exclusively through us or Twisted Turbos. All Twisted kits come with this setup. Cuts 1-2 hrs off install time depending on your wiring aptitude. Setup has been tested and proven on all years of M-sled, eliminates batteries, stator problems etc. Pm for orders. Website toll free # only works in Canada. Prices quoted are Canadian, Contact Shain for US customers.

 

[Dano702]

Sweet , that will make life a whloe lot better. I will give Shain a call .

 

[Mod800R]

would this apply to a pg boondocker turbo for a m1000?

 

[spoon]

This will work on any M-sled with a high volume intank pump setup, regardless of which turbo kit you do. Part of the reason for developing this was because of my first kit which was a Boondocker RG1000. Their fuel and wiring setup at that time did not work very well.

 

[Hallass]

Brian, just wanted to thank you again for cleaning up all the electrical gremlins in my sons 05 cutler M1000 turbo. No more battery, no more hassles, just pull and go. Now if he can keep it away from the rocks and other non-removable objects we will all be happy! Good Work!

 

[Mod800R]

i will be in contact when i get my kit ordered up....thanks a bunch!

 

[BigAir]

How many watts does your high volume fuel pump draw? Does an '08 M have enough power to run your fuel pump and still keep your headlights, stock gauge, and run an A/F gauge and Digatron?

 

[hatchers]

Tired of replacing wet relays and cutting your stock harness up to wire in your high volume fuel pump? We have developed a plug and play harness to go with your High volume intank pump or we can supply a pump and harness together. Also have connector kits to repair already hacked harnesses so unit works as it should. Relay is a fully sealed automotive grade relay with sealed connector. 07-08 Cats harness only 69.99, 05-06, 09-10 harness is 99.95. High volume pumps are 250$. Best intank pump on market. Connector repair kits are 4.99 each. Sold exclusively through us or Twisted Turbos. All Twisted kits come with this setup. Cuts 1-2 hrs off install time depending on your wiring aptitude. Setup has been tested and proven on all years of M-sled, eliminates batteries, stator problems etc. Pm for orders. Website toll free # only works in Canada. Prices quoted are Canadian, Contact Shain for US customers.

this harness is super trick and simple, fits behind my fuel tank heat shield just fine

 

[spoon]

Everything still works fine with that pump and at high boost levels. It was sourced out to be the highest volume, lowest draw pump Walbro makes. The harness makes it so your stator fuel coil runs your digatron and a/f guage and whatever else electrical you got to hang off your bars. We take advantage of all available power and try not to waste any of it.

 

[BigAir]

So this harness comes with extra connections for running gauges or what not?

 

[spoon]

only end of harness that is unfinished is power and ground with stripped ends and comes with heat shrink crimp splices to attach to whatever you want to power up with DC voltage. Usually guages and power for fuel box.

 

[Woody67]

would you mind posting some pictures of the fuel pump and the harness kits?

Thanks,
Woody

 

[spoon]

Pump appears identical to stock one except for billet inlet instead of plastic. Don't have pics of harness. Will try to do tomorrow. Once installed properly it is never seen again.

 

[kodiak-79]

pics of relay

it fits nice if you hang it backwards on one of the two steering rod bolts, then put your plate back, tighten the 2 nuts and its a done deal. I think my 6 yr old neice could have done this it was so easy!!!!

 

[Woody67]

thanks for the photos

 

[Proven]

Anything for the M7?

 

[spoon]

The 09-10 harness works on the M7.
BTW thanks for the photos Kodiak and that sled looks great. Seems to me I have seen red and white on a cat before, Hmmmm.