Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

  • Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

Pl Box???

I have a BD2860rs Tapex and I just switched to the PL box and I am not that familiar with it. If I wanna ride at home(lower elevation) do I need to adjust the fuel box settings or does it automatically compensate for the altitude difference??? Home is at 1500ft and where I usually ride is at 9000-10500.
 
I don't know for sure, but I can tell you from 6000 to 11000, I only change the fuel setting for under boost. You won't make the same amount of boost at 10,000 as you will at 6000. So just a little tweaking, it is very simple to do. You won't have to change everything if that is what you are asking.
 
i also have switched to a new pl box, and they yellow blue light is supposed to be for map sensor voltage for changing altitude? well could someone give me a good overview of the box on how the last three modes work as i have no ideal how i shold set them thanks
 
I don't know for sure, but I can tell you from 6000 to 11000, I only change the fuel setting for under boost. You won't make the same amount of boost at 10,000 as you will at 6000. So just a little tweaking, it is very simple to do. You won't have to change everything if that is what you are asking.

So what mode would I be changing??? And how much should I change it???
 
first of all what kind of numbers are you running on your PL box now ?
what doesyour A/F guage say ??
at what RPM??
and what kind of boost as well ??
and what agle of the dangle is your helix ??

I need a little more info :)
 
You would want to change the blue/green settings, which I would just go one up at a time. It will go in 1/2 increments.
 
will someone clear up how the yellow blue light works, when does it subtract fuel does it start to subtract fuel with the first light or is there a medium when this light doesnt do anything, i think we need to clear up every function of this box so we can get the best performance and fuel mileage out of these machines, purelogic wont tell you anything unless you ask, maybe derek can help us out as we all know he is the best with these boxes.
 
Premium Features



Back
Top