Pictures of some recent turbo installs
- Thread starter Silber
- Start date
Looks like a clean install Justin. I should be getting close to firing mine up today.
Y
yamaha_junky626
Member
pics
is that a blow off valve on the air box
is that a blow off valve on the air box
S
Super B
Well-known member
P
purepolaris600
Well-known member
what type of egt do you use is it a sunpro guage with a bosch wideband o2 sensor also what are the hoses going into the top of your throttle bodys for? what brand oil pump is it and do you sell the oil pumps thanks
S
Silber
Well-known member
I dont use EGT's, but run AEM wideband o2 gauges. And yes its a sunpro boost gauge.
The hoses to the top of the throotle bodies are for the vaccum source for the Blow off valve, which is mounted on the airbox.
An engineer friend of mine builds these pumps for me, And yes I can sell just the pump.
Thanks
Justin Silbernagel
www.silberturbos.com
S
Silber
Well-known member
I just velcro them there.
P
Polarismaster26
Member
Justin i have heard nothing but good new about your products. I hope to be turboing this year or a summer project. How does your turbo, boondockers and twisted compare? I am looking for a bolt on and go turbo kit. As far as tuning and maintenance goes what am i really looking at?
I have been on your web site many times dreaming
Thanks in advance
I have been on your web site many times dreaming
Thanks in advance
S
Silber
Well-known member
I am not one to say my kits is the best over some one elses. But I have these kits setup to be very complete with everything you will need to have a great running and reliable turbo sled. Like any after market product there will be some tinkering the first few rides, thats just the way it goes. Once you have it setup for your riding style and elevation, ect, they are very good about staying in tune and riding in and out for thousands of miles, just general maintenance and checkups.
If you have any questions please let me know.
Thanks
Justin Silbernagel
F
francois
Member
Don't hesitate, contact Justin if you are thinking about buying a turbo kit!
I am pretty much done will my install and so far he has been very helpful. I bought a used kit from a guy on the site and he send me the parts to update it and reflash the attitude box (free).
I probably asked him about 50 questions both by email and phone and not once did he not answer me.
I don't know anything about the other guys selling turbos since it is my first turbo sled but I know for a fact that everything that is said about the customer service is true.
Ill put some pics of mine once it's done,
Thanks Justin
I am pretty much done will my install and so far he has been very helpful. I bought a used kit from a guy on the site and he send me the parts to update it and reflash the attitude box (free).
I probably asked him about 50 questions both by email and phone and not once did he not answer me.
I don't know anything about the other guys selling turbos since it is my first turbo sled but I know for a fact that everything that is said about the customer service is true.
Ill put some pics of mine once it's done,
Thanks Justin
i too asked him a million questions.. and he still answers when he sees that im calling lol. hes got great patience and knowledge
Very nice workmanship, Justin.
K
Kestrel2126
Well-known member
Justin,
do you run, or do you suggest running any torque arms/stops, on the motor with your kit?
do you run, or do you suggest running any torque arms/stops, on the motor with your kit?
S
Silber
Well-known member
I never have ran any. Just replace that front motor mount bolt with grade 9.
S
Super B
Well-known member
Here's a quick video of my Silber Turbo idling just after I wrapped up the install.
http://www.youtube.com/watch?v=AQ_Xgr4EzT8
http://www.youtube.com/watch?v=AQ_Xgr4EzT8
RMK-King
Super-Moderator
Here is a lil test vid of mine also with the belly dump exhaust. Poor quality video but you get the point.
http://www.youtube.com/watch?v=OdXEqIw7Bc4
http://www.youtube.com/watch?v=OdXEqIw7Bc4
Last edited:
