Parting out 05 and 07 ski-doo rev 800 ho's

[idahocycle]

Currently parting out a clean title 05 rev 800. The tunnel is very slightly bent behind the flying nun, but it can probably be fixed. Almost everything for this sled is available. Sled has a 151 track and currently has a little over 1,300 miles. Engine is priced at $1250 for bare engine.

Also parting out a 2007 ski-doo x model rev 800. This one smacked a tree and the flying nun is bent. Tunnel has a small amount of damage but could definately be fixed and used. It was a 159 track with 1800 miles. Engine runs good. $1250 for bare engine. Pics are available if needed.

Just send me a message of what you need and i will get you a price as soon as i can. Got tons of parts for these sleds.

 

[summit ate]

how many miles price include carbs ?

 

[4Skidoo]

How much for a ho y-pipe?

 

[Payette_Boondocker]

Hello,

How much would you want for the left side front shock, a-arms off the 07? The 05 would probably work to.
I hit a tree towards the end of last season and have not even touched it this summer.

 

[johnstock]

05 rev

how much for rolling chassie?

Currently parting out a clean title 05 rev 800. The tunnel is very slightly bent behind the flying nun, but it can probably be fixed. Almost everything for this sled is available. Sled has a 151 track and currently has a little over 1,300 miles. Engine is priced at $1250 for bare engine.

Also parting out a 2007 ski-doo x model rev 800. This one smacked a tree and the flying nun is bent. Tunnel has a small amount of damage but could definately be fixed and used. It was a 159 track with 1800 miles. Engine runs good. $1250 for bare engine. Pics are available if needed.

Just send me a message of what you need and i will get you a price as soon as i can. Got tons of parts for these sleds.

 

[TOBC]

control cluster

Looking for LH light/thumb warmer controls. PM Thanks

 

[kuch]

I need the 07 motor pipe carbs clutch and wiring harness ecm ect. How many miles on the motor? How much for the parts listed? Where are you located?

 

[snowmobileman]

I need either '05 or '07 800 engine and harness.

 

[timber_tramp]

Handlebars

Im interested in the handlebars from the 07 if their in good shape.

 

[Shaun Lees]

need jackshaft

if you have a jackshaft that will fit my 04 800 let me know

 

[Snow Duck]

seat/tank

where are you located and do you still have the seats and tanks if so how much...

 

[MXRacer58]

Do you have any engine bolts for 05 800 ho? Im looking for head bolts, cylinder bolts, mounting bolts, pipe springs and a few other small items. let me know ASAP thanks

 

[mxracer328]

do you have a chain case cover?, ill send a pm also

 

[lancelarue]

You have a PM

 

[rideina800cat]

i am lookin for a 800 motor set up to put in a 600 rev if you still have the 07 how much?

 

[skierdude]

A arms

what do you want for the left upper and lower a arms for the 05?

 

[trckr48]

looking for 800 engine for my renagade reply to trckr 48@yahoo.com

 

[yamacatskidoo]

belly pan

does the belly pan look ok? is it for an xrs? call lbuc at 406-370-4960

 

[d&mraceengines]

pmed you