P-85 Spider: Roller Pin Spun... Help

[mountainhorse]

I have a 2006 P-85 that has a roller that siezed up and spun the shaft in the spider assembly.

The spider is not "worn out" at the pin. Does anyone know of a source for replacement spiders or some kind of "kit" that fixes this.... the standard spider kits just replace the pins/rollers/spacers and dont address worn aluminum in the spider. Or does someone offer a replacement spider??


Any help is much appreciated.

 

[jim]

I've had mine replaced before...tough to do alone cause you have to pull the spider with a special tool and its around 220 foot pounds.

 

[mountainhorse]

getting it out is not the problem.... finding one or an oversized pin kit is...

 

[sled_guy]

You can't buy just the spider.

Your best bet is to find someone who has a broken clutch, maybe face cracked or something like that. Then get the spider from that and put your clutch back together and have it balanced.

PM Brad (1200PSI) and see if he has a spider.

I looked in my parts bin and I don't.

sled_guy