Nytro lower spindle bushing.

[Tuesday]

In the picture it looks like you can replace the bushing within the lower part of the spindle but on the manual break down I dont see the part. I have replaced all the lower ski components but there is still a ton of movement at this bushing.

thanks

 

[jrusher]

My spindles were the same i got tired of replacing them as bushing was totally gone or spindles were cracking and bending.. You could make your own use bronze for material.. Or do like most of us go to a aftermarket front end and be done witrh it..

 

[MTN_VIPER]

I believe the part number for the lower bushing(s) is 90384-16N51-00 (bushing bi-metal) 2 required. The sleeve comes up as 90387-10036-00. Often the sleeve will rust and wear out the bushings.

 

[Tuesday]

I believe the part number for the lower bushing(s) is 90384-16N51-00 (bushing bi-metal) 2 required. The sleeve comes up as 90387-10036-00. Often the sleeve will rust and wear out the bushings.

Thanks I have the sleeves but the parts list did not have bushings for the lower spindle.

2 per spindle thus needing 4 to do the front end?

Tues

 

[MTN_VIPER]

Thanks I have the sleeves but the parts list did not have bushings for the lower spindle.

2 per spindle thus needing 4 to do the front end?

Tues

Yes 4 required total.

The picture is kind of confusing, it looks like it's pointing out the entire spindle. However when you scroll down the page to the part number it says bushing bi-metal and the price comes up at $4.87 ea at sports plaza. Which sounds about right for a bushing.

Bill

 

[DooTraxx]

Anyone got any pics of the spindle bushing kit that Up Bushman is selling over on TY?

 

[DooTraxx]

Has no one done this? I am looking for a better bushing for here as this is where most of my slop is.