Nytro Handlebars

[christopher]

As the season is now coming to an end for me, and I am converting over to ATVs for the summer, I noticed that I managed to bend both sides of my handlebars.

There was one particularly nasty crash this winter in a blizzard, and my chest managed to push the handlebars forward a bit on both sides.

Is there anything out there I should be considering for a replacement other than OEM bars??

 

[throttlecable]

Is there anything out there I should be considering for a replacement other than OEM bars??

RSI has a bar for any and every application, and they are far superior to OEM.

 

[wilmot]

As the season is now coming to an end for me, and I am converting over to ATVs for the summer, I noticed that I managed to bend both sides of my handlebars.

There was one particularly nasty crash this winter in a blizzard, and my chest managed to push the handlebars forward a bit on both sides.

Is there anything out there I should be considering for a replacement other than OEM bars??

You wrecked your beauty. You must have thumped it good to bend your bars. When it's a white out close your eyes and use the FORCE

 

[justinkredible56]

As the season is now coming to an end for me, and I am converting over to ATVs for the summer, I noticed that I managed to bend both sides of my handlebars.

There was one particularly nasty crash this winter in a blizzard, and my chest managed to push the handlebars forward a bit on both sides.

Is there anything out there I should be considering for a replacement other than OEM bars??

Stock handlers are around $165 I think I paid around 75for my rsi bars and they are supposed to be tougher, ill guess we'll see!

 

[blackhillsnytro]

Yep there are definitely stronger bars on the market than the stockers. RSI, CR and a few others would have a chromoly setup that would last a long time

 

[christopher]

You wrecked your beauty. You must have thumped it good to bend your bars. When it's a white out close your eyes and use the FORCE

Its amazing just how much force your chest can transmit to your handlebars when you transform your sled into a Yard Dart and plant it into a rock hard drift.

 

[pylon]

after bending and breaking many sets of bars the best set up ive found is fly snowcross fat bars . With the fat bars risers and a CR steering post i managed to bend my steering gate this year with out even tweeking my bars . you'll also find its a good time to look at an aftermarket throttle block to clean up your bars a bit

 

[christopher]

Don't see anything matching that name??
http://www.flyracing.com/snow/hard-parts/handlebars

 

[pylon]

poor web site
http://www.flyracing.com/sites/default/files/aero_taper_snow_bend_chart.pdf

 

[christopher]

Thanks.
So is the "Snowcross Fat Bar" that you spoke of no longer being offered by Fly?

 

[pylon]

I'm running the snow X race bar with the hooks on the ends . They are still offered by fly , they just hide them on the web site a bit . If you look under the colors section on the page you were on the different bends are down there . Fat bars flex quite a bit while riding and are much better than 7/8th bars . That's why they are now stock on most MX bikes . RSI also offers some bars that are pretty close but had too much sweep for me