No gauge or reverse

[Wheel House Motorsports]

2012 pro, had the hood and everything off working on the oil pump. put it all back together and CANNOT figure out why the gauge and reverse wont work.

Cant find a single missing connection, anything?

checked all main junctions for botched pins. I know hood harness is connected as the key works for shutting it down.

Sled does have a headlight delete.

any ideas?! this thing has me a bit concerned. rode it saturday for 3 hours without the gauge... worked great. I just really dont like the idea of running with no gauge.

 

[slash]

POS FAILED GAUGE GET ONE FROM ANOTHER SLED AND TEST IT ,OR JUST START OVER BY REMOVING THE ASMBLY AND REINSTALLIN IT

 

[slash]

with NO beer this time

 

[Wheel House Motorsports]

this was one of my few 0 beer projects. ill see if i can hunt one down to test against.

 

[penny1l]

sounds stupid but i had the same thing happen !!! check where all the grounds are bolted mine was loose

 

[TRS]

Nick,
Check your "chassis power relay".

 

[Wheel House Motorsports]

Nick,
Check your "chassis power relay".

Tony, spot on, had some corrosion on the pins, cleaned em up and were back in action!

 

[Flyn Or Dyn]

reverse

I had the reverse just stop working on mine one day out of the blue. Everything was plugged in couldn't figure it out, Looked at everything top to bottom. It ended being the capacitor in the ECU.