new traction boards for your rev's

[meathooker]

After getting several requests to design a traction board for the rev we've came out with the following board for your rev!

a few neat features that set these apart from others:

2 - 45 deg bends to create a box section: increases stiffness
the 45 ends at the void: this directs the snow on the inside of the board to further eliminate build-up
foremost cleat reversed to aid in foot removal from footwell and keep you from sliding into the sled: saves knees
pre-located holes aid in a professional looking install
added detail to tunnel brace

As with all Feethookers they are $150 shipped to the lower 48, add 15 for AK, 20 for canada. They come standard in a black powder coat finish.

 

[AkSledHed]

Are these going to require some chopping up of the stock boards or do these go on top of the existing boards?

 

[meathooker]

Are these going to require some chopping up of the stock boards or do these go on top of the existing boards?

you'll want to cut the area where there holes are under these boards to let the snow fall through. don't worry though you are taking out material .06" and replacing it with .125"...it is much stiffer.

 

[blacksnow]

it would be a deal if the "windows" were larger

 

[meathooker]

it would be a deal if the "windows" were larger

i debated on making them larger. they are the same width front the back as my IQr boards, and wider side to side. the IQr boards work very well with the current configuation, and no snow build up. with these being wider they will evacuate snow very well.

 

[Rotax-Guy]

Look like the Better-Boards I just installed? Come up with something new!

 

[meathooker]

Look like the Better-Boards I just installed? Come up with something new!

they have several design differences (improvements)

2 - 45 bends to increase stiffness and snow evacuation.
more aggressive cleat design
pre located holes - make installation quicker and cleaner looking (straight lines)

oh yeah..and they cost 50 less + cost of shipping.

better features + lower cost = the BEST bang for your buck

 

[blacksnow]

i debated on making them larger. they are the same width front the back as my IQr boards, and wider side to side. the IQr boards work very well with the current configuation, and no snow build up. with these being wider they will evacuate snow very well.

they have several design differences (improvements)

2 - 45 bends to increase stiffness and snow evacuation.
more aggressive cleat design
pre located holes - make installation quicker and cleaner looking (straight lines)

oh yeah..and they cost 50 less + cost of shipping.

better features + lower cost = the BEST bang for your buck

:beer:
aggressive cleat design for sure!
best of luck with sales, now if i could only find a couple extra dollars...

 

[harrysmith500]

I know this is a Rev thread.. but just to have a look @ Carl's digital camo boards.

http://snowest.com/forum/showthread.php?t=184714