New Product: ZRP - GEN 4 TAILSTANDER ADJUSTABLE WEIGHTS

[ZRP Engineering]

Just a follow up..
I was pulling 7900 behind the widow maker..
Pull 2 ounce from the heal? Or middle?
Or just leave it?
Thanks!

Fresh belt and clean clutches
No 19 tooth gear yet Kandog!
Soon!



Sent from my iPhone using Tapatalk

I would try removing 1g-2g total and see where that puts you.

 

[PaulAnd]

I just wasn’t sure about where to pull it from?
Heal
Middle
Tip
I’m not sure if I’ll notice 2oz just curious
What weight does in each respective position
Thanks!



Sent from my iPhone using Tapatalk

 

[ZRP Engineering]

I just wasn’t sure about where to pull it from?
Heal
Middle
Tip
I’m not sure if I’ll notice 2oz just curious
What weight does in each respective position
Thanks!



Sent from my iPhone using Tapatalk

2oz is like 55g, so do not do that.

You can think of the holes as 1-2 gear then 3-4 gear and then 5-6 gear. So it depends how it is shifting and performing in those ranges.
I would probably pull it from the middle hole.

 

[PaulAnd]

Haha grams!
Thanks!

I’m a pin and go kind of guy,
If it works I usually won’t complain!
And it’s been working!
No belt dust
Belts are lasting
Pulls hard
No black marks on clutches
So really dialed in clutching might be lost on me!?



Sent from my iPhone using Tapatalk

 

[FlynHigh]

How closely matched are the base weights? Are they within 1g 0.5g or 0.1 gram or less?

 

[turbo800]

How closely matched are the base weights? Are they within 1g 0.5g or 0.1 gram or less?

All 3 of mine are within .1 gram
My scale doesn't go any finer resolution.