New New New Products for 2017

goridedoo · Aug 4, 2016

AKFULLTHROTTLE said:
Ya my thought was the hood already comes off in seconds so the panel was not needed for me anyways... Seams that panel will only restrict air flow there but is what it is!

Remove it and add a vent.

TreeThrasher · Aug 5, 2016

What is the story with the aluminum tank? Lighter? Any potential for a light aluminum tank and light seat rather than suspension seat?

Reg2view · Aug 5, 2016

TreeThrasher said:
What is the story with the aluminum tank? Lighter? Any potential for a light aluminum tank and light seat rather than suspension seat?

Structural for the suspension seat pivot. Couldn't do that with a plastic tank. Framing around a plastic seat would be awkward.

Sled Solutions · Aug 5, 2016

TreeThrasher said:
What is the story with the aluminum tank? Lighter? Any potential for a light aluminum tank and light seat rather than suspension seat?

Yes, weight savings has not been released yet.

This kit will also be available with a frameless Burandt seat.

Retail $1499.95

AKFULLTHROTTLE · Aug 5, 2016

Sled Solutions said:
Yes, weight savings has not been released yet.

This kit will also be available with a frameless Burandt seat.

Retail $1499.95

How many gallons?

Sled Solutions · Aug 5, 2016

AKFULLTHROTTLE said:
How many gallons?

8.3 Gallons

Killer Time Racing · Aug 13, 2016

Paul ,

Your site is so full of spam I can't even look at a part without it telling me I'm infected or my brand new phone battery is junk ... Good products as far as I can see though

Sled Solutions · Aug 13, 2016

Killer Time Racing said:
Paul ,

Your site is so full of spam I can't even look at a part without it telling me I'm infected or my brand new phone battery is junk ... Good products as far as I can see though

I'm on our site now which is protected by a SSL and it looks normal to me. Not sure what you're experiencing but try it on a computer when you have time. Our new website is almost done so watch for that.

blacklabel28 · Aug 13, 2016

rear shocks for axys on the website?

Sled Solutions · Aug 14, 2016

blacklabel28 said:
rear shocks for axys on the website?

What shocks are you looking for, Fox?

blacklabel28 · Aug 14, 2016

Yes sir, looking for a price really. Will buy them eventually. Skinz site doesnt have much axys stuff listed or bba

Sled Solutions · Aug 14, 2016

blacklabel28 said:
Yes sir, looking for a price really. Will buy them eventually. Skinz site doesnt have much axys stuff listed or bba

Keith Curtis Freeride/Mountain spec shock kit is available for the rear. Are you looking for all the way around or just rears?

Front Track Fox 1.5 Zero Pro
Rear Track Fox 1.5 Zero RC2

blacklabel28 · Aug 14, 2016

Was thinking all the way around, with a 36 or 37 a arms. Reason I inquire is I was planning on buying a lot of skinz gear so itd be nice to get it all in one swoop. (And maybe a small discount too) ?

Sled Solutions · Aug 14, 2016

blacklabel28 said:
Was thinking all the way around, with a 36 or 37 a arms. Reason I inquire is I was planning on buying a lot of skinz gear so itd be nice to get it all in one swoop. (And maybe a small discount too) ?

AH!!! So shoot me an email paul@sledsolutions.com as to what you are looking at and we can take it from there. We will obviously work with you on price if it's a sizeable order. :present:

Sled Solutions · Aug 25, 2016

Actual Picture of the Access Hood.

AKFULLTHROTTLE · Aug 25, 2016

Looks good! Wish it did not have the large "Access" printed on it...

Do we have a weight yet?

Sled Solutions · Aug 25, 2016

AKFULLTHROTTLE said:
Looks good! Wish it did not have the large "Access" printed on it...

Do we have a weight yet?

Not yet, I think I'll have it Sunday.

christopher · Aug 26, 2016

Sled Solutions said:
A lot going on here including a completely new website. Here is a sample of some new stuff coming for the Polaris AXYS from Skinz.

Lightweight Aluminum Gas Tank and Suspension Seat for guys with bad backs.

Thanks,
Paul

Sure would like to know MORE about this seat Paul.

Sled Solutions · Aug 28, 2016

christopher said:
Sure would like to know MORE about this seat Paul.

Christopher,

This is the info I have on the seat. If you need more than this let me know.

 FreeRide – AMT (All Mountain Terrain)
Lightweight Gas Tank/Seat Kits

Gas Tank/Adjustable Shock Seat Kit $2249.95
· Ultra-Lightweight aluminum gas tank developed with Hill Climb Racer Cole Willford (2FIVE2) to be a durable yet weight reducing modification to his race and backcountry machines
· TIG Welded/Formed look, with aggressive styling
· 8.3 gallon capacity tank
· Includes AMT Adjustable Shock Seat with up to 4” of travel
· For aggressive trail riding or mountain riders that want to raise or lower the position of the seat depending on the day’s riding, here is a product that allows the seat to be changed quickly and easily
· Available with an ARC shock for additional comfort and adjustability
· Billet machined aluminum
· Geometry allows for shorter or taller riders
· Either kit must be purchased with AMT gas tank
Gas Tank/Adjustable 2 position Seat Kit $1499.95
· Ultra-Lightweight aluminum gas tank developed with Hill Climb Racer Cole Willford (2FIVE2) to be a durable yet weight reducing modification to his race and backcountry machines
· TIG Welded/Formed look, with aggressive styling
· 8.3 gallon capacity tank
· Available with AMT Adjustable 2 position Hi/Lo Seat.
· For aggressive trail riding or mountain riders that want to raise or lower the position of the seat depending on the day’s riding, here is a product that allows the seat to be changed quickly and easily
· Billet machined aluminum
· Geometry allows for shorter or taller riders
· Either kit must be purchased with AMT gas tank
Gas Tank/ Burandt Frameless Seat Kit $1499.95
· Ultra-Lightweight aluminum gas tank developed with Hill Climb Racer Cole Willford (2FIVE2) to be a durable yet weight reducing modification to his race and backcountry machines
· TIG Welded/Formed look, with aggressive styling
· 8.3 gallon capacity tank
· Available with Burandt Frameless Low Ultra Lightweight Mountain Seat Kit
· For aggressive trail riding or extreme terrain mountain riders
· Either kit must be purchased with AMT gas tank
<!--[if gte mso 9]><xml> <w:WordDocument> <w:View>Normal</w:View> <w:Zoom>0</w:Zoom> <w:TrackMoves/> <w:TrackFormatting/> <w

unctuationKerning/> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid> <w:IgnoreMixedContent>false</w:IgnoreMixedContent> <w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText> <w

oNotPromoteQF/> <w:LidThemeOther>EN-US</w:LidThemeOther> <w:LidThemeAsian>X-NONE</w:LidThemeAsian> <w:LidThemeComplexScript>X-NONE</w:LidThemeComplexScript> <w:Compatibility> <w:BreakWrappedTables/> <w:SnapToGridInCell/> <w:WrapTextWithPunct/> <w:UseAsianBreakRules/> <w

ontGrowAutofit/> <w:SplitPgBreakAndParaMark/> <w

ontVertAlignCellWithSp/> <w

ontBreakConstrainedForcedTables/> <w

ontVertAlignInTxbx/> <w:Word11KerningPairs/> <w:CachedColBalance/> <w:UseFELayout/> </w:Compatibility> <m:mathPr> <m:mathFont m:val="Cambria Math"/> <m:brkBin m:val="before"/> <m:brkBinSub m:val="--"/> <m:smallFrac m:val="off"/> <m:dispDef/> <m:lMargin m:val="0"/> <m:rMargin m:val="0"/> <m:defJc m:val="centerGroup"/> <m:wrapIndent m:val="1440"/> <m:intLim m:val="subSup"/> <m:naryLim m:val="undOvr"/> </m:mathPr></w:WordDocument> </xml><![endif]-->
<!--[if gte mso 9]><xml> <w:WordDocument> <w:View>Normal</w:View> <w:Zoom>0</w:Zoom> <w:TrackMoves/> <w:TrackFormatting/> <w

unctuationKerning/> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid> <w:IgnoreMixedContent>false</w:IgnoreMixedContent> <w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText> <w

oNotPromoteQF/> <w:LidThemeOther>EN-US</w:LidThemeOther> <w:LidThemeAsian>X-NONE</w:LidThemeAsian> <w:LidThemeComplexScript>X-NONE</w:LidThemeComplexScript> <w:Compatibility> <w:BreakWrappedTables/> <w:SnapToGridInCell/> <w:WrapTextWithPunct/> <w:UseAsianBreakRules/> <w

ontGrowAutofit/> <w:SplitPgBreakAndParaMark/> <w

ontVertAlignCellWithSp/> <w

ontBreakConstrainedForcedTables/> <w

ontVertAlignInTxbx/> <w:Word11KerningPairs/> <w:CachedColBalance/> <w:UseFELayout/> </w:Compatibility> <m:mathPr> <m:mathFont m:val="Cambria Math"/> <m:brkBin m:val="before"/> <m:brkBinSub m:val="--"/> <m:smallFrac m:val="off"/> <m:dispDef/> <m:lMargin m:val="0"/> <m:rMargin m:val="0"/> <m:defJc m:val="centerGroup"/> <m:wrapIndent m:val="1440"/> <m:intLim m:val="subSup"/> <m:naryLim m:val="undOvr"/> </m:mathPr></w:WordDocument> </xml><![endif]-->

Sled Solutions · Aug 28, 2016

Sunvang said:
Do you have any photos of the rail stiffeners installed? Har dto see exactly where it is to be mounted.

Also would like to know price og rail stiffeners and lower replacement a-arms.

Thanks

New New New Products for 2017

Well-known member

Well-known member

SnoWest Forums Sponsor

Well-known member

SnoWest Forums Sponsor

Well-known member

SnoWest Forums Sponsor

New member

SnoWest Forums Sponsor

New member

SnoWest Forums Sponsor

New member

SnoWest Forums Sponsor

SnoWest Forums Sponsor

Well-known member

SnoWest Forums Sponsor

Well-known member

SnoWest Forums Sponsor

SnoWest Forums Sponsor

Similar threads