hey guys im changing my track and i have everything off except the drive shaft i got the bolts out of either end but cannot get the bearing out, is there a trick to this????
need help changing track please!!
- Thread starter nunuexpress
- Start date
come on guys im in my shop with my laptop please let me know!
ok i will assume you have the chaincase completely off, have the torx setscrews loose on the bearing collar, have the track enough out of your way to shove the shaft all the way to the right then it should drop out.
Should be able to pry the bearing out the left hand side of sled to get enough room to get shaft slid to the right.
Hope this helps some
kirk
Should be able to pry the bearing out the left hand side of sled to get enough room to get shaft slid to the right.
Hope this helps some
kirk
Talk too Fordman, he has the fastest take off of anyone!!!
Check here for a manual, it is helpful when you have the laptop out there.
Wait, what sled are we talking about here? The above is for a nytro...
Wait, what sled are we talking about here? The above is for a nytro...
do i have to take the chain case right off, right now i have it opened and the gear out??
All the way off or you wont have enough room
M
MTdream
Well-known member
first is this a nytro? or an apex?
if Nytro, here is a really good pictoral directions...
http://www.ty4stroke.com/viewtopic.php?t=47824
if Nytro, here is a really good pictoral directions...
http://www.ty4stroke.com/viewtopic.php?t=47824
thanks pal im on it!!!!!!!!!!!!1
good question to ask, but since he was having trouble with the bearing coming off (shouldn't have to take it off on a nyrto from what i have read, but i have never done one yet) It must be a apex or similiar style. I hope, otherwise all my typing was for not lol
its a viper 700
yeah, but i think i will catch up on nytro maintenance pretty soon by the time I get my m10 and turbo installed. LOL
M
MTdream
Well-known member
yeah, but i think i will catch up on nytro maintenance pretty soon by the time I get my m10 and turbo installed. LOL
here is a killer thread compiled with links to lots of great stuff...good pics and info for maintenance etc. on Nytros
http://www.ty4stroke.com/viewtopic.php?t=58910
I have used it a LOT...doing the switch from Rev to Nytro has been interesting!!!
Thanks for the link
W
woodies
Guest
i down loaded and holy chit nice! printed it off at the office 401 pages nothings going to stop me now!
thanks ruffy i owe you one if i ever see you!Steve
