Mpi 180 kit ?

[apex 9420t]

Trying to get my new viper dialed in and had some questions. Will the turbo work as good if you go for stock look and leave intake under hood? Or should you chop up hood and have it snorkel out the top? Also good starting point for clutching for big guy. Any info appreciated

 

[BOOSTD]

Trying to get my new viper dialed in and had some questions. Will the turbo work as good if you go for stock look and leave intake under hood? Or should you chop up hood and have it snorkel out the top? Also good starting point for clutching for big guy. Any info appreciated

I highly recommend outside the hood.

 

[apex 9420t]

Got her in about 3 ft of powder yesterday and the results weren't good, wouldn't hold rpms about 7200 was all I could get, any help on clutching would be appreciated

 

[BigFish BC]

Got her in about 3 ft of powder yesterday and the results weren't good, wouldn't hold rpms about 7200 was all I could get, any help on clutching would be appreciated

was the snow over the hood if so the intake will effect the rpm as it can not get enough air.

 

[stingray719]

Got her in about 3 ft of powder yesterday and the results weren't good, wouldn't hold rpms about 7200 was all I could get, any help on clutching would be appreciated

Turbo yet or not? 2015 MTX or other like XTX?

 

[Climbmax]

Cold air intake is an absolute must if you ever load the motor or are in more than 12" of fresh.
Cheers

 

[apex 9420t]

Got it mounted outside and took some weight out off clutch going to try again! I hope she responds can't listen to all the trash talk from the pro fags

 

[motojunkie101]

They will stop talking when they are changing pistons and rings while you are just doing an oil change.

 

[motojunkie101]

Plus count the weekends they are down when you can go ride with no worries about your sled getting you home.