MPEM and DESS

[crooklyn]

Is the DESS matched to the MPEM ?
I have switched out motors between an 01 chassis to an 03 chassis and i want to use the black shell that goes over the gas tank that has the DESS key on it.

I'm using all the electrical, motor & wiring from the 01 including MPEM. Do i have to swap the DESS?
Is it better to get the MPEM flashed if thats the case?

Thanks

 

[Motley Doo]

Yes, I'm pretty sure. Have to go down to a ski-doo dealer and have them program the key to it.

 

[Canuk]

yup, they work together.

 

[crooklyn]

Is there a quick way to remove the DESS ?
do i need a special tool to remove it?

 

[Redsledhead]

Should be able to take the dess out of the 01 and put in place of the 03 dess

 

[Motley Doo]

The plug designs are different between the sleds, so you might have to do some wiring.

 

[Redsledhead]

I'm using all the electrical, motor & wiring from the 01 including MPEM. Do i have to swap the DESS?

Motley Doo The plug designs are different between the sleds, so you might have to do some wiring.

If he uses all the wiring from the 01 everything should wire up the same

 

[Motley Doo]

^^Yeah, but he had to have switched EVERYTHING over. I was trying to remember if there were any chassis plugs that plugged into those MPEM's.

 

[Redsledhead]

I helped my son-inlaw do the swap and just used all the 01 parts and everything swaped and works great

 

[crooklyn]

Well it worked.

The DESS Key and the MPEM are matched.
The post is just a terminal.

thanks all