Mcx display ?

[sledheadd]

On the boost display can you switch it to psi instead of kpa.
Also is this a boost only or does it also read vacum.

Nice guage but it came with no instructions.

 

[TBird]

On the boost display can you switch it to psi instead of kpa.
Also is this a boost only or does it also read vacum.

Nice guage but it came with no instructions.

No instructions?
I got mine as an pdf on the cd along with the application and drivers.
pm me your mailaddress and i send it to you if you can't find it.

I don't know of any way we customer's can change it, but email to MCX and ask to be safe, would be a nice option!

And it shows vacuum!

Janne

 

[sledheadd]

Thanks Tbird I didn't know the instructions were on the cd. I have moved recently and must have miss placed it I should be able to find it in storage. if not I will send you my address

 

[drinkwyo]

Pretty sure u cannot change to lbs. Mark , the US mcx distributor told me he has to convert his to find out what he is running. He did tell me that he was running 28 lbs through his sled a couple weeks ago.

 

[TBird]

Pretty sure u cannot change to lbs. Mark , the US mcx distributor told me he has to convert his to find out what he is running. He did tell me that he was running 28 lbs through his sled a couple weeks ago.

Remind that if the display says 193kpa it's 93kpa boost @ sealevel, which is 0.93bar, which is 13.5 lbs.

 

[sledheadd]

I now have a new problem. The a/f reads 15.7 and never changes. What would cause this? Bad sensor maybe ? If sensor is bad wouldn't an error code or nothing at all show up ? Or could it be something else ?
Anyone ever have this happen to them before ?

 

[TBird]

Bad sensor most problably, i would suspect bad connection would make the reading erratic!