Making the XM Deep Snow Worthy

[i'llDooit]

Ya that's deep powder guy

 

[Deep Powder Guy]

I already have the proto type made, know it works based on past testing last winter. I need to verify the measurement distance between the stock part and the mod part once I'm able to verify the part it will be available for under $49.95 delivered. So be patient Rome wasn't built overnight. If you want to bash that's AOK by me.

Will be available for all skidoo models and only certain cat & poo models.

DPG

 

[HPJUNKIE]

There is merit to this. Had a set of oversized blocks on the rear of a King Cat & it did stiffen up the rear.

 

[sketch96]

If the back end sags too much you need heavier springs not bigger blocks. The softer spring will sag out over time and not hold its spring rate. You can crank it up all you want to get the height sitting still, riding under load the rate is too soft. jmo!

 

[ROKRIG]

I'm probably about 255-260 with gear on. I ride a 2013 154 XM X. I've got the HD torsion springs and the Hygear torsion spring inserts installed.

Big difference. Have the Zbroz reservoir shock in the rear as well with dampening adjustment.

Gonna swap all of this over to my 2015 T3 when it arrives.

 

[sledhead747]

Xm's run nails from the factory. Why anyone would buy a Pro is beyond me. Best sled I've ever owned. Just putting Fox Floats and a clutch kit in it for this year. No complaints. Much tougher than previous doos and much more power than all the other brands