I have an 09 m8 with Speedwerx porting, head y pipe pipe and can, I also have the intake opened up. Has anyone got the same setup and if you do what Boondocker numbers are you running?
m8 Speedwerx Boondocker numbers
- Thread starter Topogigo
- Start date
I have a speedwerx 800 BB in my M7 with a pipe can reeds sno pro intake etc. Here are my #'s start with them then work down.
3000 0-0-0-0
5000 2-0-0-0
6700 10-2-0-0
7800 0-2-9-0
8100 0-2-9-0
hope this helps, like I said you'll probably be a bit rich with these but better to start high and work down than start low and blow up.
3000 0-0-0-0
5000 2-0-0-0
6700 10-2-0-0
7800 0-2-9-0
8100 0-2-9-0
hope this helps, like I said you'll probably be a bit rich with these but better to start high and work down than start low and blow up.
PM me with your setup including elevation and track length.
162 Inch track 5000-7000 feet. 160 320 primary spring Heavy hitter @ 75.8 g 36 Deg secondary with D&D torque secondary, Purple spring (stiff), 1 tight, no reverse. I am 220 dressed.
Similar threads
