Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

  • Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

M8 2011 Sputtering

hey, my m8 2011 was sputtering, so i changed the reed valves( boyesen super stock) and fix the oil pump(oring around the arm) cause it was stiking). now i start it, run around 3k rpm idle...cold or warm..when drive it, was sputtering LIKE HELL. before the skidoo was drivable.. but now its not drivable at all. i have made marks on tps and remove it from throttle body. and put it back on. tps may be the cause? not proprely ajuster or tps is faulty? no codes in dash..
got bikeman y pipe and can!
tanks alot!
 
riding around the house yesterday and burned the 2 spark plug pto side. today i was adjusting the tps, and now the engine is running around 2000 rpm at idle. i ride around the house and burned the 2 spark plug magneto side... all 4 spark plug was new from friday...

i have remove the stock tune pipe to check inside the y pipe and its all wet.. it smell like gas i think..

tanks!
 
hey, my m8 2011 was sputtering, so i changed the reed valves( boyesen super stock) and fix the oil pump(oring around the arm) cause it was stiking). now i start it, run around 3k rpm idle...cold or warm..when drive it, was sputtering LIKE HELL. before the skidoo was drivable.. but now its not drivable at all. i have made marks on tps and remove it from throttle body. and put it back on. tps may be the cause? not proprely ajuster or tps is faulty? no codes in dash..
got bikeman y pipe and can!
tanks alot!
ITS NOT A SKIDOO!
 
TPS brand new and corectly ajusted. reeds are new, oil pump is fixed. idle fine and runs fine.. but same problem again... sputtering.. do not go over 7300rpm when wot.. sometime runs like charms and go 8000-8100...

new gas, new spark plug/sparkplug cap and wires, tss disconected.. plug in ecu was dry.. i have put a bit of dielectric grease..
 
Last edited:
Premium Features



Back
Top