What is set at and how do you check it
M-7 fuel pressure??
- Thread starter tatorsalad
- Start date
I have a BMP inline fuel reducer w/ gauge on my M (came with my sled when I bought it...) but they're like 80.00 or so. If you don't use the fuel reduction feature, it's kinda a waste....BUT at least you'll know what your fuel pressure is before doing any mods...want to say "normal" from the factory is a range, like 38-48psi, or something like that. Feel free to PM me with any questions.
http://www.bikemanperformance.com/p...d=138&osCsid=b3888e05f759aa0c52cf6acaa65bfd19
http://www.bikemanperformance.com/p...d=138&osCsid=b3888e05f759aa0c52cf6acaa65bfd19
Right at 43 PSI is stock. I see them go from 41-45 on most sleds. You can get an in line gauge at any autoparts store.
But be carefull where you put it, and once you start messing with the stock fuel line it goes bad real fast, in my experience. Just use high quality fuel injection rated hose, and good clamps and fittings...don't mess around here, that hot pipe is too close.
I like 41 psi, and I run down low, and did get my ecu re-flashed in '06, but your milage (and safe fuel pressure) may vary.
John
