m-10 NEEDS ADJUSTING

[turboman1]

I have a turbo nytro with a 162 m-10 and i rode it this weekend and it had so much ski pressure i could not even ride it. Was thinking that the front arm need to be in the top hole on the slide rail would that help. It has air shocks 100psi in the rear 20 psi in the front . thanks any help would be great . dustin

 

[boosted metal]

drop your limiters to decrease ski pressure, you can also buy smaller transfer blocks in the rear

 

[turboman1]

drop your limiters to decrease ski pressure, you can also buy smaller transfer blocks in the rear

limiters are way loose allready

 

[pylon]

try running 60 psi in the front . it helps for sure .

 

[yammi4ever]

I had same problem, so far I have cranked up front shock to around 100 pounds and lowered the front mount point in the torque arm brackets. Made a world of difference on ski pressure, but still would like more transfer. I am slowly moving the fra adjuster back and when it starts to bottom (hasn't yet) I will cut the blocks if I still need more transfer. Everyone says to keep working on it, that I just need to put some time into tuning it and I will really love it when it is RIGHT. It rides great, and is showing real signs of improving with each adjustment, hope everyone is right.