Low RPM problems

[bignasty]

I have an '05 m7 which has problems idling along with running in other low RPM ranges. Once it gets up high enough it runs like a charm, but to get there the throttle has to be moved very slowly otherwise it bogs down.

I thought maybe it had something to do with the exhaust valves sticking, but that usually only is from high RPM's ranges. But I cleaned those anyways, and it didn't make a difference.

Any ideas?

 

[furthur]

Any mods? Clutch springs broken?

 

[colorado logger]

Can

Do you have a stock can to try, Some after market cans just did not work on 05 m7.

 

[bignasty]

Vforce 3 reeds, and a can is all it has. What puzzles me is that it used to run fine then it sat over the summer, and i put handle bar risers on it, and now it's doing this.. ??

 

[columbus]

Vforce 3 reeds, and a can is all it has. What puzzles me is that it used to run fine then it sat over the summer, and i put handle bar risers on it, and now it's doing this.. ??

Did you have fuel stabilizer in it over the summer? If not, I bet you have dirty/clogged injectors.

 

[everytime5.9]

Sounds like bad fuel, i doubt you did any damage with a bar riser upgrade unless you messed with the throttle position sensor or something.

 

[bignasty]

How do you clean the injectors?