Just bought a 14 with boondocker turbo GTX2860 w/ tial exhaust air to air. Anyone know the correct weight setup for low elevation? Took it for test ride in low elevation with 10-70 in it and having hard time getting rpm's high. Want to confirm weights before i assume there is something else going on.
Low elevation Boondocker
- Thread starter skruba
- Start date
P
polarisblue
Member
Try 10-68 with a team almond spring
Well since a stock one runs 70 grams I would say you need a lot more weight. What are your clutching specs? If you are running 70 grams at low elevation on a boosted sled and not pulling rpm something else is wrong...
Well did some more inspection and found 120 compression test and found a leaking crank seal.
Well 120 is fine and most pressured crankcases will blow out oil.
Hi my name's Jeff and I've had a leaking crank seal since 2016. At first it just seemed normal but now I'm afraid I've gotten to the point where I can't come back. I find myself constantly thinking about boost everywhere I look. Thanks for letting me share.
Motor had several issues. pistons had damage, Crank bearings, crank seal! Ordered a indy Dan motor.
