long track sno scoot

[utah340six]

ok in going to build another one.

what ideas do we have as mods.

want easy one that any one can do in the garage / shop

 

[volcano buster]

I installed grease zerks in the back of the spindle tubes, inner portion of A-arm and both rear suspension tubes.

Skid plate/belly pan

Hot Grips

Just to get started...

I would be curious to know if a track in the 100" range is available and could be matched up to a driver.

 

[couch]

AD Boivin has a 108" x 11 X 1.25 track that works great (snow bike kit track)- has to be ported and clipped so takes a bit of work but the length / lug profile is a great fit for the scoot / sport.

A bit of fairing under the engine would be great as well - keeps a bit of the ice / moisture off the engine.

Plastic skis are a must!!!! Anything is better than stock steel anchors. Open up the boards as well - easy to make a "Skinz" type board with a little prep and a bit of basic wielding work.