Led bulbs to 800 rmk

[Antsa]

Hey.

Anyone using Led bulbs inside oem headlight?

Something like this:
126W/piece http://www.ebay.com/itm/H13-9008-25...ash=item43f723c23c:g:XuMAAOSwYIxX~vtH&vxp=mtr
or
90W/piece http://www.ebay.com/itm/2X-PHILIPS-...ash=item3d2a748bda:g:NZUAAOSwImRYHD0a&vxp=mtr
or
80W/piece http://www.ebay.com/itm/2x-160W-16000LM-H13-LED-Headlights-Lamp-Conversion-Kit-PHILIPS-Chips-Hi-Lo-Beam-/192033024871?hash=item2cb60f6b67:g:XQkAAOSwgmJXzzz-&vxp=mtr

I was wondering how much wattage can you draw from the stator to not burn it.

With those amps would probably have to use relays and battery.

Any ideas?

 

[likkerpig]

Well I'm no expert and I have no experience with led lighting on these Sleds, but I'd imagine as long as you stay with the factory values in terms of draw you'd be safe. Led *should* draw less power so in theory you should be able to use a more powerful bulb/output and still remain under the factory electrical draw.

Hopefully someone else more knowledgeable chimes in here. I've been interested in led lighting but for me it's cost prohibitive because I just don't ride at night much anymore

 

[The Bob]

Problem is they are saying they draw 80-126watts a piece. That is more than a factory headlight draws. Kinda funny as it looks like it has a heatsink for a resistor built in, wonder why they would use such a big resistor when most bulbs are 55-65watts.

 

[BILTIT]

I wouldn't waste my time with those bulbs, i would use these:

http://www.cyclopsadventuresports.com/3200-Lumen-H13-LED-Headlight-bulb_p_119.html


I have used many cyclops lights and they are all a very good quality product.

I put cyclops led bulbs in my 04 pro-xr and they really brighten up the night!

 

[Antsa]

any one?

 

[mountainhorse]

They would not be plug and play... factory is AC power to headlights... LED's run on DC power...

You would have to rectify the power going into the new bulbs.



.

 

[gtwitch]

X2 on AC to headlights
gtwitch in wyoming