Is something bent here??

[White Rad]

trying to figure out what else i might of bent up front and noticed my left ski (also the side i think i bent the bulkhead brace on and hood won't align) has a noticable negative camber and the right ski does not. something else bent here?? it does not look like the a arms, shocks, or mounts are bent anywhere and the spindle looks staright steering is nice and smooth...

 

[WyoBoy1000]

are the bolts ripping through, on the bulk head. It should lean some not sure how much

 

[cody7thomas]

How are the Bushings? Cracked? i would say something is a little jimmy riged their my sled doesent fall in like your picture. It also may be the ski deciving you? what does your other side look like??

 

[Mainer]

had this issue one time. i had bent the shock on one side so i got a replacement and noticed the camber issue. figured something else was bent but could not find the issue. it turns out they gave me a crossfire shock by mistake.

 

[skimike]

I notice that those camber out in a turn or when one side is higher than the other, check alingment and ride height on each side , make sure everything is 100% level and even

 

[M6johnny]

Mine looked the same way. I replaced all of the a arm bushings and problem solved.