Hey everyone. I am replacing my ski leg, so now I need to re align my skis. Any tips? What I have been told is that I can run something from my track then measure it straight off that. and point the tips out .25in.... Any tips?
How Do I Align My Skis?
- Thread starter carlinoj
- Start date
W
Wyoming T/A
ACCOUNT CLOSED
correct..run a long straight edge from the back of the track out to the front of the skis,,ck each one ..we toe them out 1/8 " total..ck each side then front to back of the skis
B
BackCountryBob
Well-known member
Try an 8' 2x4--lay it against the track, measure the distance from the 2x4 to the end of the ski and the front of the ski, toe out 1/8 to 1/4 depending on you preference. Doo the same on the other side--make sure your bars are straight then secure them.
Good luck on finding straight 2x4's
Good luck on finding straight 2x4's
Ok sweet. I will let you know if that does not work.
The 2x4 or straight edge on the track is the best way
elevate sled....
Be sure to align the left ski with the bars first (put the bars perfectly straight, then align left ski to straight edge)
Then align the right ski to the left.
elevate sled....
Be sure to align the left ski with the bars first (put the bars perfectly straight, then align left ski to straight edge)
Then align the right ski to the left.
Does anyone cut to pieces of wood to hold the handle bars straight off the frame, then do the alignment? Works great!
