Help with SLP powder pros?

[pernikm]

Bought some shinny new SLP powder pro's but when I install the rubber pad under the spindle, it sure is a tight POS and when I pivot the ski it sure looks like it wants to squirt out. I run a 96 polaris wedge and I was wondering if the stock pad should be used or do I have the wrong SLP part?

Karl

 

[JET FUEL]

Could you post a pic?
I have slt and PP and I've had to bolt the saddles on the SLT skis so i had enough leverage to get the bolt through the spindle and then switch ski bottoms when it was done, So ya its a tight fit.

 

[CO 2.0]

They are a very tight fit. You can get the bolt in though if you work at it.

 

[pernikm]

I got it together...I just used some c-clamps...Just kinda odd forcing it so much...But when I pivot the skis, it sure looks like the rubber wants to squirt out.

 

[skibreeze]

I noticed that the rubber is squirting out on my stock skis.

 

[joegoo]

Powderhounds are the same on the new IQ's, at least mine were.