help with a new summit

[canyon851]

I just bought a new 2000 700 highmark 151. I have a couple of questions if anyone can help it would be much apreciated.
1. What is the tallest riser I can put on it without extending the cables?
2. I has a union bay racing head on it, what issues could I encounter with that head?


Thanks

 

[XPSer]

Riser

Not sure if there are any significant differences, but I was able to put a Powermadd articulating riser w/4" block(about a 6" rise total) on my 2000 MXZ 700. I ended up cutting the zip ties loose and re-routing a couple cables. Brake line is a bit tight, but it's held up for the past 4 seasons with no problems. Good luck!

 

[mannix]

No idea on the head, but on my 03 Summit 700, I added a total of 4" rise with a pivot-block deal. The handlebars are rotated forward a bit, which helps with brake hose/cable/wire issues. I could not get much/any more out of it without extending the brake hose.

When I was researching it, 3-4" seemed to be the "max" most people got out of it without extending stuff, although there are a handful of people out there who got 6", like XPSer.

4" held true on my sled, though.


Iain

 

[capen4]

I have an 01 summit 800 with 3" block and a set of Rev handlebars all I had to due was lengthen the heater wires and rearrange the brake and throttle cables a little about 7" of lift.